Installation of the SOUNDLIGHT USBDMX1 Interface

Connect the USBDMX1 Interface to a free USB Port and check that some LED
indicators are lit. If this is not the case, check the red power switch and
set the switch to enable USB power supply.

Select SETTINGS - SYSTEM CONTROL and click the ADD NEW HARDWARE symbol.

As the device to be installed is known, we do not need automatic installation.
Thus, select NO, DEVICE IS NOT IN THE LIST.

Check the list and select USB CONTROLLER.

As the USBDMX1 interface is not contained within that list, select HAVE DISK
and then BROWSE.

Now click NEXT, NEXT and FINISH.

This completeshe installation of the SOUNDLIGHT USBDMX1 Interface.
Please copy the DASHARD.DLL dynamic link library to the \WINDOWS\SYSTEM
folder. You are then ready to load and try demo programs to check the interface.